Scrubber Columns

During waste combustion, contaminants are set free through the help of flue gas. Therefore it becomes necessary to clean the air before discharging it into the air. And this is done through drenching the solution of lime water in the Scrubber Column. For continuous cleaning practice, a constant level is required within the flue gas scrubber. Our manufactured products are made up of finest quality of raw materials due to which it ensures durability in the product nature. We provide full documentation and extremely corrosion resistant.

How It Works

• 1.The contaminant gas comes in the bottom of the tower. Sprays within the tower wet the internals.
• 2.The contaminant gas is forced to through a bed (Normally on metal wire shape) that breaks the gas flow into many small flow streams. The numerous gas streams pass around the wet fill and make contact with the scrubbing liquid.
• 3.The gas leaves the scrubbing bed is wet. Liquid droplets and mist carried with the gas are then forced through another bed of packing, or mist elimination pads, to remove most of the moisture
• 4. The impact on the elimination bed material knocks the mist out of the gas stream. The dampness gathers on the bed material to form droplets that fall back into the tower.

Specification

• Dimensions：1000mm（40inches）to 3400mm（134inches）
• Weights：1500kg（3360lb）to 6900 kg(15210lb)
• Capacity: 1000 tons/day (Higher capacities available)
• Operating temperature: up to 275°C (530°F)

Effectiveness Estimated Through Below Factors:

• Temperature
• Flow of the components
• Reactivity
• Velocity
• Contaminants solubility

Materials

• Carbon Steel A36, A515, A516, CRM0
• Stainless Steel 304, 316, 309, 310, 321
• Nickel Alloys 200, 400, 600
• Alloy 20, AL6XN, 2205 Duplex
• Copper Alloys
• Aluminum
• Titanium